HM Casting Tape
INTRODUCTION
HM Casting Tape is lighter than conventional plaster cast or fiberglass cast and 20 times stronger and more solid.
It is more efficient than a conventional or fiberglass cast when treating air permeation or moisture in a hygienic way.
It is easier to use than a conventional or fiberglass cast.
It is eco-friendly.
It has better X-ray permeability than a conventional or fiberglass cast.
Made of polyester and impregnated with resin.
It is more efficient than a conventional or fiberglass cast when treating air permeation or moisture in a hygienic way.
It is easier to use than a conventional or fiberglass cast.
It is eco-friendly.
It has better X-ray permeability than a conventional or fiberglass cast.
Made of polyester and impregnated with resin.
VARIATION & SIZE
|
HS Code |
Product Code |
Spec |
|
9021.10 |
HMC2*360 |
5cm X 3.6m |
|
9021.10
|
HMC3*360 |
7.6cm X 3.6m |
|
9021.10
|
HMC4*360 |
10cm X 3.6m |
|
9021.10
|
HMC5*360 |
12.7cm X 3.6m |
|
Material : Polyester |
||
|
About Casting Tape Color |
|
|
Green |
|
|
Purple |
|
|
Pink |
|
|
Blue |
|
|
White |
|
WEARING PROCEDURE [ Short arm - Thumb spica ]
1. Bandage the injured part with surgical net and cotton bandage and wear protective glove.
2. Open the product and put it into the water for 3 - 5 seconds at room temperature (20 - 25℃ / 70 - 75℉).
3. Take the cast out and remove water adequately for 2 - 3 times.
4. Wind the injured part gently to stack about half of the bandage for 3 - 4 times on common part and 5 - 6 times on part bearing the weight.
5. About 10 to 15 minutes after the shape is completed, the procedure is completed.
2. Open the product and put it into the water for 3 - 5 seconds at room temperature (20 - 25℃ / 70 - 75℉).
3. Take the cast out and remove water adequately for 2 - 3 times.
4. Wind the injured part gently to stack about half of the bandage for 3 - 4 times on common part and 5 - 6 times on part bearing the weight.
5. About 10 to 15 minutes after the shape is completed, the procedure is completed.